Mexican telecaster serial number dating

Fender Serial Numbers, to Present more or less not always up to date Dating a Fender guitar with the serial number is a hit or miss propisition.

It helps narrow things down, but in most cases is an inexact science. Leo Fender never intended for his guitars to become collectors items. He never invisioned a need to pinpoint the manufacturing date of any of his guitars. At least not while he was at Fender Musical Instrument Corporation. Before Fender guitars hd a serial number on the bridgeplate or neckplate. Serial numbers are basically chronological, but there is some overlap in some years.

The bridge plate or neckplate were applied to a guitar with no thought to keeping any kind of number sequence. Fender serial numbers were assigned like this: In the factory, there was a large container with serialized items such as neckplates and bridges. A Fender employee simply reached in and grabbed one or many and installed them on the instrument s as they worked. As you can see from this over-simplified example, serial number assignment was fairly random.

Just keep this in mind. The only truly definitive way to date a pre-CBS fender is to look at all the dates on the instrument body date, neck date, pot dates. The serial number can only generalized the age of the instrument within a few years. Fender Esquire, Broadcaster, and Telecaster Serial Numbers to serial number stamped on bridgeplate.

This system of serial numbers is unique to these three models until about the early summer of when Fender switched to a universal neck plate serial number system for all models: This was probably done as a cost saving measure. Because different companies did the stamping of the serial numbers on neckplates they vary in location and layout.

Double stamped serial number plates were also produced number on both front and back of the neck plate in late to early Unfortunately, there is also some overlap in serial numbers between years again due to the fact that neckplates were re-ordered various times from various manufacturers.

It was an error by the company that produced the neckplate stamping for Fender. Fender was using up their neckplates with numbers under , So, they ordered neckplates that were supposed to have numbers above , Fender demanded corrected neckplates immediately. But it took a while to manufacture and number the plates. So, the company just used the L Plates not wanting to let them go to waste. You can imagine that it might have been cheaper to have the serial numbers added to the decals rather than have them machined.

But you can also imagine that there were many times for inventory purposes when suppliers, vendors, and etc. So starting in mid the serial number was moved to a decal on the peghead. So, the information on the peghead could be off as much as two years.

In March , CBS sold Fender to a group of private investors made up of the management of the corporation at the time. The serial numbers do not reflect this change Fender continued to make instruments using existing serial number schemes. Many Japanese companies started make knock-off versions of US electric guitar designs. Once these guitars started effecting sales of US made guitars, US guitar manufacturers decided to put a stop to the infringement and to join in the process all at the same time.

The corporation sometimes put the Fender logo on these guitars and sometimes put the new name Squier on the these models. So, initially, Fender imported guitars from Japanese manufacturers who had proven their ability to produce affordable, viable instruments. In an effort to produce lower priced products, without having to utilize Fender Japan in the process, Fender built a second modern manufacturing facility in Ensenada, Baja California, Mexico, with the goal of being able to build quality instruments and offer them at more budget-oriented prices.

Not all schemes are covered here. Below are some examples of letter prefixes used in recent serial number schemes. They were made for the export market and have Made in USA stamped on neck heel. If you have serious interest in learning about the history of Fender instruments, or if you just want to try to establish the year of production of your own axe, we would highly recommend that you pick up one or more of the following books.

They are detailed reference resources with a wealth of information for helping to either establish the vintage of your guitar or bass or for just learning more about Fender history in general. These books are the same resources we refer to here at Fender, when trying to research answers to these same history and dating questions. You may want to consider ordering one or more of the following reference books: Most notably, production dates have been penciled or stamped on the butt end of the heel of the neck of most guitars and basses.

There were periods of time when this was not consistently done, between and , and there are certainly other examples of short periods of time, and individual pieces, where the dating was simply omitted. While this neck dating is useful in roughly determining the age of a guitar, it is certainly not definitive. The neck date simply refers to the date that the individual component was produced. So, obviously a neck date, while being helpful in providing a date range of production, it cannot be a definitive reference.

Unlike the auto industry which has specific model years for their products, most specifications for a given Fender instrument model, change little if any, through the lifetime of the model. While there have been periods where dramatic changes have occurred, for example: Serial numbers are also helpful in determining the year of production of a given instrument. Serial numbers have been used in various locations on Fender instruments through the years.

They have been placed at the top of the neck plate, on the front of the headstock, on the back of the headstock, and on the back of the neck near where the neck bolts onto the body.

If you have interest in establishing a relative value for your instrument,it might be helpful to contact any of the used or vintage instrument dealers in your area. Vintage Guitar magazine is a great resource for people who buy, sell and trade vintage instruments and should be quite helpful. You might also want to check with one of the many instrument dealers who offer appraisals of vintage instruments such as: You can also check with your local pawnshops, as most refer to this book, or one like it, to establish the values or used instruments.

Lastly, one of the best measures of value may be completed Ebay Auctions for similar guitars. All of these are excellent resources for researching the fair market value of your instrument.


Stratocaster numbers are hard to read without a hcap.ga guitar guide will help you lookup the fender serial database and show your telecaster age. fender serial dating fender strat number china, fender mexican serial number, fender acoustic serial number. dating fender guitars made in mexico. This new scheme is now used on the majority of fender instruments made in mexico, with certain hcap.ga jim root telecaster, james burton standard telecaster, buddy guy stratocaster polka dot model, robert cray stratocaster and jimmie vaughan stratocaster use an msn serial number hcap.ga .

Total 1 comments.
#1 12.11.2018 в 11:34 Sergeyudelnov:
Quite a good note